DH180-H Bussing Machine

Cycle time: 18 sec/panel (shielding bypass soldering); 23 sec/panel (opening bypass soldering);

Activation: ≥ 98.0%;

Cell Specification: 156mm-220mm (initial configuration according to customer demand)

Panel specification:

6 strings × 10 half pieces × 2 & 6 strings × 12 half pieces × 2 & 6 strings × 13 half pieces × 2
5 strings × 10 half pieces × 2 & 6 strings × 10 half pieces × 2 & 5 strings × 15 one third pieces × 2 & 6 strings × 15 one third pieces × 2
Cell space: - 0.5-4mm, String space: 1-6mm;
Compatible with 21xmm 5 series version

Glass specification: width (980-1400mm) × length (1630-2500mm);

Correction accuracy of cell string: ≤± 0.25mm;

Equipment power supply: three-phase 380V 50 / 60Hz;

Power: peak 30kW; average 20kW;

Air: positive pressure 0.6 ~ 0.8MPa, negative pressure about - 70kPa (provided by customer);

Equipment size: length × width × height: 4930mm × 4613mm (including two assembly lines) × 2641mm.

产品详情

Cycle time ≤ 18s, high speed.
Strong compatibility: compatible with half pieces of 6 strings and one third pieces of 5 strings.
Corrects twice to the position of the 10 / 12 series half piece cell string, grabs the cell string by vacuum adsorption, one time empty soldering and high welding accuracy.
Convenient specification conversion.
Can punch at the end of the bus bar.
Single side feeding, easy to operate.
Bypass soldering integration can meet the customer's demand for 5-part series soldering of bypass bus bar, bypass soldering can be closed or opened according to the actual use demand.
The smallest floor area, the lowest CoO.

菜单1